ther than a hard failure of a device or component drawing excessive current, the most likely cause is that the fuse clips for the fuse have overheated and/or lost their spring retention. The suggested course of action is to check the fuse clips for signs of overheating and/or wear. If necessary, replace the original fuse clips with more robust fuse clips (part number 415-2068-030).
Why do the F1 fuses on either the PA modulator or the PA boards of my AM transmitter routinely open? Print
Modified on: Tue, 8 Oct, 2019 at 10:20 AM
Did you find it helpful?Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.